FREE SHIPPING — On all orders £550 + vat      Minimum spend £330 + vat (£50 delivery charge)
Check delivery in your area
Showing 505–513 of 513 results
Check delivery availability in your area above.
A cement bonded particle board with exceptional strength and durability. Intended for uses as an SFS sheating board. Thermal conductivity ≤0.55 W/mK. ✔ View Technical Manual Thickness 12mm Dimension 12 x 1200 x 2400 Pallet Quantity 43 per pallet
Check delivery availability in your area above.
Versarend is an A1 non-combustible exterior grade direct render base board with mesh reinforcing facings. Thermal conductivity 0.22 W/mK.  For futher technical information refer to this link. Features and Benefits Versarend® can be readily fixed with recommended screws and easily cut with a utility knife Versarend® is UKCA marked according to BS EN 12467:2012+A2:2018 “Fibrecement flat…
Check delivery availability in your area above.
Versaroc® MPA1 is fibre cement board comprising ordinary Portland cement with inorganic reinforcing fibres. Ideal for exterior sheathing of SFS frames due to high durability and non-combustibility. Conformity assessed to BS EN 12467:2012+A2:2018. It is classified as Reaction to fire: A1 non-combustible according to BS EN 13501-1:2018. Light grey in colour, Versaroc® MPA1 is relatively…
Check delivery availability in your area above.
Wondertex prem fill & finish is a filler and smoother, designed for filling and finishing plasterboard joints and smoothing unwanted textured surfaces. Super fine for a smooth finish. Dries hard for a durable finish. Effortless sanding. Minimal shrinkage for no cracks. Fast setting for early sanding. 60 minute working time. Â For further technical information…
Check delivery availability in your area above.
A plaster based fast setting compound for the bedding and filling of tapes, external metal angles and corner tapes. Just mix with water for easy application. Super fine for a smooth finish. Fast setting for early sanding. Effortless sanding. Minimal shrinkage for no cracks. 60-90 minutes working time. Â For further technical information refer to…
Check delivery availability in your area above.
Wondertex prem finish is suitable for the finishing of all plasterboard joints. It is specially developed for hand and machine jointing and may be referred to in the marketplace as a joint cement. Just mix with water for easy application. Suitable for hand and machine jointing. Extended working time, less wastage. Effortless sanding. No shrinkage…
Check delivery availability in your area above.
Combi Pack Components: 1 x HD10+ Roll 1 x YELOfon E-Strip (7mm x 200mm x 33m) 2 x YELOfon J-strip (75mm x 33m) YELOfon HD10+ is the ultimate acoustic resilient layer for underneath a floating screed and is one of the most iconic products in the Cellecta acoustic floor insulation range. The acclaimed high density,…
Check delivery availability in your area above.
YELOfon HD10+ is the acclaimed resilient layer system that carries 3 proprietary Robust Details: E-FC-5, 17 & 18. The system is lightweight, easy to install and delivers unrivalled acoustic performance when used to isolate a floating screed from a structural concrete floor. Superior impact sound deadening properties. Lightweight, easy to handle, cut and install rolls….
Check delivery availability in your area above.
YELOfon HD5 is a lightweight, easy to install non-crosslinked polyethylene foam, specifically designed to reduce impact noise through concrete floors with a floating screed. The product is Robust Detail E-FC-8 compliant when used in conjunction with XFLOOR 250 and DECKfon Ultralay 5.  For further technical information refer to this link. Product Benefits High impact sound…
No products in the basket.