K-Rend HP12 Base Coat 25KG Bag (40 per pallet)
£15.28 inc VAT (£12.73 ex VAT)
Check delivery in your area
Check delivery availability in your area above.
HP12 Base Coat is used as a preparation coat for K Rend top coat finishes. HP12 Base Coat can be hand or machine applied. It uses ‘High Polymer’ technology for an enhanced performance on difficult substrates such as dense block, unpainted render and brickwork (providing K Rend R7 Primer is used in conjunction with this). It is ideal as a stipple coat or for dense backgrounds and has increased water resistance and adhesion.
Incorporation of Alkali Resistant Reinforcing Mesh may be required at stress points such as door and window reveals. HP12 Base Coat can be used in conjunction with all K Rend finishes including Scraped Texture, Thin Coat, Dash, Roughcast and Brick Rend.
- High Polymer for enhanced performance on difficult substrates.
- This base coat can be applied on to difficult substrates.
- HP12 Base Coat is suitable for a thin coat finish.
- HP12 can be hand or machine applied with ease.
For further technical information click here.
Technical Data
| Require: | 8 – 11kg / sq m approx.
| nominal 4-6mm thickness Up to 12mm thickness onto masonry substrates |
| Classifications according to | BE EN 998-1 |
| Compressive strength: | CS IV |
| Capillary water absorption category: | W2 |
| Thermal conductivity: | P=50% – 0.61 |
✔ View Technical Datasheet✔ View Application Instructions
| Pallet Quantity | 40 per pallet |
| Pallet Quantity | 40 per pallet |
|---|---|
| Unit | per Bag |
Brand
Kilwaughter